MicroMax A116 Canvas HD has one issue in the box pack piece.. the G-Sensor Calibration is too off and owing which it simply doesn't auto-rotate:
Good News is you can easily fix the issue by calibrating the auto-rotation sensor..
Do the following for steps to fix it:
Good News is you can easily fix the issue by calibrating the auto-rotation sensor..
Do the following for steps to fix it:
- First switch OFF the mobile
- Then we have to switch it ON but by pressing 3 keys - PRESS (Both) UP & DOWN KEY ALONG WITH THE POWER BUTTON to switch on the mobile
- Enter Factory Mode
- Select ITEM TEST
- Select G-SENSOR CALIBRATION
- Put the mobile on a Table such that the CAMERA is outside the surface, we will have to ensure that the mobile is completely horizontal and not tilted because of the camera that comes out at back cover.
- Press SETTINGS Key and Do NOT TOUCH the mobile.. The calibrations will start NOW..
- Once Calibration is DONE....Go Back and then REBOOT the mobile your problem will be solved....
- Micromax Canvas A116 is an awesome mobile, Enjoy it!!
Some users have found that this issue comes back again.. but it works fine for most of the users.. To solve the issue if it comes back you can install an Screen Orientation Control App from Google Playstore and manually orient the screens when required. Its also a good option to lock your screens when you want it oriented in specific way even when you are moving your mobile.
Thanks
Thanks
2 step was confusing... up down and volume key are the same right?
ReplyDeleteYes, Press both UP and Down Key along with the Power Button to switch on the phone, Thanks for noting that out I will update that step accordingly.
ReplyDeleteAbove step will work only for sometime. Keep on calibrating every time is pain. Do we have a permanent fix ?
ReplyDeleteThis is temp solution , it revert backs to its state again.
ReplyDeletethanks dude...my auto rotate problem is solved perfectly..LOTS OF THANKS..:-)
ReplyDeletehow to operate:
1. you have to move up down by volume key
2. select using properties touch senser at bottom left side.
3. Go back by right side bottom back sensor...
I was desp that touch select is not working. then i tried the bottom left touch senser to select. it worked..GREAT...
select using bottom left touch sensor. not using screen touch. it will work.
ReplyDeletego back using bottom right touch senser with (with u-turn arrow)
I found that this issue reverts back and I personally have started using SCREEN ORIENTATION CONTROL APP. It works for me by manually setting the orientation as required..
ReplyDeleteaftre 5th step der is option likre
ReplyDeletedo calibration (40)
back
but wen i select calb 40 der is no responce. de say initize fail
it solves problem temporary, after some days same problem occurs.
ReplyDeleteanyone has permanent solution on the same?
Can u tell me how to calibrate Canvas doodle 2....help me ...i m really canfused....
ReplyDeletecan some one upload a photo of position in which we have to calibrate.
ReplyDeleteplease reply fast.
yes its working.... Thanks.
ReplyDeletethnkyu its done in my cenvas a114
ReplyDeleteThanx really its works
ReplyDeleteThanx !!! iT worked!!!
ReplyDeleteThanks u so so......... much yes after doing all the above steps my mobile micro max canvas 2 plus calibration (auto rotation ) start working very quick and good manner. I was facing this problem past 1month i tried all sort of methods from all websites but none of that work out but one blog post of your's get the job done for me... Thank you..
ReplyDeleteHii, when i tried the caliberation item check it only appeared pass or fail button and it does'nt worked so plese help me regarding this or tell me a name of screen orientation app
ReplyDeleteis it delete any data of my device??
ReplyDelete